Services & Products
Delivering complete floor protection solutions installed by experienced professionals.
Services
The flooring specialists. At CPS Flooring, we supply and install seamless epoxy flooring and polished concrete and perform repairs to virtually all concrete surfaces.
High-Performance Seamless Flooring Systems
Decorative Quartz Flooring
Quartz Floor Systems blend ceramic-coated quartz aggregate with a clear polymer matrix, creating a wide range of finishes and textures for distinguished style and performance.
Ideally suited to commercial, institutional, and industrial uses, these versatile systems can be tailored to your environment.
Available in a trowel system and a broadcast system
-
Thickness ranges from 1/8” to 1/4”
-
Available in endless blends of multicoloured silica sand
-
This Seamless Floor System is highly durable and easy to clean
-
Available with a variety of finishes: non-slip, satin, matte, gloss, chemical-resistant, etc.
-
Low VOC and odour
-
Trowelled cove bases are available.
Ideal for: Washrooms, Showers, Labs, Corridors, Operating Rooms, Pharmaceuticals, and Car Dealerships.
Seamless Epoxy
100% solids epoxy systems are low-viscosity, epoxy resin-based, and solid-colored. This formulation is designed to optimize versatility and can be applied in a multitude of ways, ranging from smooth coatings, textured coatings, broadcast systems, slurries, and screed mortars.
-
Thickness ranges from 1/8” to 1/4”
-
Available in a variety of solid colours
-
Available in medium- and heavy-duty floor systems
-
Finishes include orange peel, non-slip, or smooth finish.
Ideal for: Janitors' rooms, labs, corridors, manufacturing facilities, animal care facilities, food preparation areas, kitchens, clean rooms, etc.
Epoxy Floor Coatings
Floor coatings consist of high-solids, low-odor, low-VOC, finely textured, pigmented finishes. It produces a durable, easy-to-clean, ceramic-like finish on interior surfaces. Can be applied over concrete and gypsum board. Seamless epoxy floor coatings inhibit the growth of bacteria, mold, mildew, and fungi.
-
A cost-effective way to seal and protect concrete & gypsum board
-
Available in a large variety of solid colours
-
Can be completed in chemical-resistant coating, in nonslip, or in an orange peel finish
Ideal for: Medium- to light-duty traffic areas, showers, commercial kitchens, restrooms, locker rooms, etc.
Floor Leveling/Cementitious Topping
Cementitious topping is typically quick-setting and self-leveling and is optimized for polishing. It's suitable for interior and exterior use.
-
Heavy-duty floor system, with a compressive strength up to 3x that of concrete
-
Can be installed at 3/8” thickness or any thickness
-
Can be polished and dyed to be aesthetically pleasing
Ideal for: Any retrofit/renovation/addition/revitalization. Ideal for high-end residential units, retail stores, warehouses, schools, kitchens, airports, loading docks, etc.
Polyurethane Flooring
Polyurethane systems have been designed to perform in extreme service conditions, such as those found in the food and beverage industry, manufacturing, and chemical storage or processing facilities.
-
The properties of polyurethane systems make them ideal for extremely demanding hygienic requirements where frequent and intensive steam, hot water, or chemically aggressive cleaning is required. This system can tolerate temperature ranges of -40 degrees Celsius to 90 degrees Celsius.
-
The heavy-duty system allows for heavy point loads and frequent heavy-duty traffic.
-
Available in a troweled-down application, a screed application, self-leveling, vertical grade for coving, and complementary high-build and roller-applied top coats.
Ideal for: Industrial kitchens, clean rooms, water & wastewater treatment plants, chemical processing and storage facilities, and freezers.
Waterproof Flooring / Mechanical Room Waterproofing
Waterproof flooring is an elastomeric polyurethane coating system designed specifically to waterproof, dustproof, and provide sound-deadening properties to suspended slab mechanical, electrical, and utility rooms.
-
Seamless, waterproof, and easy to clean
-
Does not support the growth of bacteria
-
Impact resistant, good abrasion resistance, and chemical resistance
-
Low maintenance
-
Available in nonslip and a variety of colours
Ideal in: Mechanical rooms, electrical rooms, janitor rooms, housekeeping rooms, sprinkler rooms, computer rooms, tub rooms, etc
Sealed Concrete
Ideal to seal newly placed concrete. Can be used on any horizontal old or new interior concrete surface where a moderately abrasion-resistant surface is required.
-
Non-yellowing
-
Colorless and odorless
-
Provides some chemical and abrasion resistance
-
Reduces dusting
-
Complies with environmental, health, and safety regulations
-
Approved by the Canadian Food Inspection Agency
Polished and Dyed Concrete
Polished concrete is completed by grinding the concrete floor surfaces, whether new or old, with a variety of different diamonds to achieve a glossy finish.
-
The finished product achieves superior durability and performance to that of concrete.
-
As polishing is a multistep process, you can choose the level of sheen, from satin to high-gloss, that meets your maintenance and aesthetic requirements.
-
Along with polishing, coloring with stains and dyes, decorative engraving, and stenciled graphics finishes are available. Ideal for achieving interesting decorative effects by applying multiple colors of dye and using faux-finishing techniques.
-
Polished concrete is an ideal flooring material for a variety of applications since it is so versatile.
Ideal for: Warehouses, offices, retail outlets, high-end residential applications, etc.
Transform Your Space
Transform your facility with our comprehensive flooring protection expertise, where advanced engineering meets precision installation. Start a project.
